From the Managing Director’s Desk:

The Prime Minister’s message on August 15, 2018, about the human spaceflight has set ISRO abuzz with activities and excitement….

Read More

IPC India opens an office in Delhi to facilitate better services to its client in the NCR and northern parts of India.

The contact details of the new IPC India office at Delhi are as follows:
Contact Person: Mr. Abhishek Upadhyay
Address: Elcina House, 422, Okhla Industrial Estate
Phase-III, New Delhi – 110020.
Contact: +91 9313224509 /
+91 7338466579
E-mail ID: AbhishekUpadhyay@ipc.org

IPC India introduces E-Commerce portal:

IPC India has introduced e-commerce portal which can be used by the customers to enrol their candidates for the courses conducted by IPC India.


The portal can also be used for taking up of IPC India membership. The same can be facilitated at:


Courses conducted by IPC India during August 2018:

-IPC-A-610G CIS – at Chennai,August 06 to 09, 2018 – No. of participants: 14


-IPC-7711/21C CIS – at IPC Training Centre,Bangalore, August 13 to 17, 2018 – No. of Participants: 06


-IPC-7711/21C CIS, IPC Training Centre – Bangalore, August 20 – 24, 2018 – No. of participants: 04


– IPC-A-610G CIT/CIS, IPC Training Centre – Bangalore, August 21 – 24, 2018 – No. of participants: 09


– IPC/WHMA-A-620C CSI, IPC Training Centre – Bangalore, August 27 – 31, 2018 – No. of participants: 06


– CID, IPC Training Centre – Bangalore,August 31 – September 01, 2018 – No. of participants: 10


Courses Tentatively Planned By IPC India During September 2018:

• JSTD001 G – CIS & CIT – 03rd to 07th September2018 – at Bangalore

• IPC/WHMA-A-620C – CIT – 17th to 21st September 2018 – at Bangalore

• IPC-610G – CIS – 17th to 20th September 2018 – at Delhi

• IPC/WHMA-A-620C – CIS – 24th to 28th September 2018 – at Bangalore.

Industries who referred IPC standards during July 2018:

SFO Technologies Pvt. Ltd.
Lava International Ltd.
Tata Consultancy Services Ltd.


US agency signs MoU with an Indian company for 41 MW power project in Andhra Pradesh

A US trade development agency today signed a memorandum of understanding with an Indian private company for the development of a41-MW hybrid wind . . .

Read More>

Boeing To Provide Platform to Indian Startups in Aerospace Sector

“Boeing is providing a platform to promote innovation in India. Such platforms accelerate Start-up India and give impetus to Make in India and Skill India,” Niti Aayog Chief Executive Amitabh Kant said to CNBC . . .
Read more at:

Huge ‘Make in India’ success! Rs. 3 lakh crore saved in last 4 years by made-in India mobile phones

On the back of Modi government’s ‘Make in India’ initiative, the domestic mobile handsets and components manufacturing industry . . .

Read more

Several established companies have shown a keen interest to set up manufacturing units in Jharkhand

While Jharkhand has not yet achieved prominence among the top IT and ESDM destinations of India, the state government is slowly gearing up to play a bigger role . . .
Read more

ICEA working with BAC to promote Make in India for medical electronics

ICEA, India’s industry body representing electronics sector is working with Bay Area Council (BAC) to establish India as the global manufacturing hub in the medical electronics sector and other electronics verticals, the industry body stated on Monday . . .
Read more

Dr. G. Satheesh Reddy appointed as new DRDO chairman

The Centre on Saturday appointed renowned scientist, Dr. G Satheesh Reddy, as Chairman of the Defence Research and Development Organisation (DRDO) and Secretary in Department of Defence Research & Development (DDR&D) . . .

Read more

Professor Vedu Mitter FCQI examines the impact of digital transformation for organisations and stresses the importance of employee engagement for deriving full benefits of this transformation.

Read more

IPC India has hosted a ‘HAND SOLDERING COMPETITION’ on July 09 and 10, 2018 at Convention Centre, HAL, Bengaluru, as part of the 5th Aerospace and Defence Manufacturing Show. The winner of the competition is Mr. Mahadeviah from M/s. Kaynes Technology and the runner-up for the competition is Mr. Kantha Raju K R from M/s. Bharat Electronics Limited.

The Winner and Runner up prizes were handed over by Mr. Arunakar Mishra – MD CEO – Genser Aerospace and Mr. K Venkatasubramanyam – Vice presidentSIATI, respectively.





IPC India – A supporting Association at the Electronica India / Productronica India – 2018.
IPC INDIA will be a “Supporting Association” at “Electronica India / Productronica India” to be conducted from September 26–28, 2018, at BIEC, Bengaluru, India.

During the event IPC India will conduct the following events:

1. Hand Soldering Competition

Date  Event
September 26 & 27, 2018 Preliminary Round.
The winner & Runner up of this round will be announced on 27th evening.
September 28, 2018 Finals.
Contestants will be winners & Runner-up of current and previous preliminary rounds.

The winner of the final round will be announced on 28th evening, who will get a chance to represent India at the global Hand Soldering Competition at IPC APEX EXPO 2019 San Diego, USA during the last week of January 2019.

Read More

2. Advanced Professional Development Course

Date & Time Title of the Course Presenter
09:30AM – 1:00PM September 27, 2018 High Speed PCB Design Analysis & Challenges Mr. SLN Murthy

Read More

3. PCB Design Competition:
The winner of the PCB Design competition, currently under progress will be declared on September 27, 2018, at the venue.

Read More

• IPC’s Call for Participation for IPC APEX EXPO 2019:
IPC – Association Connecting Electronics Industries® invites engineers, researchers, academics, technical experts and industry leaders to submit technical conference abstracts and course proposals for IPC APEX EXPO 2019 to be held at the San Diego Convention Centre.

Read More










Wisdom Wednesday calendar: (Free Webinar for members only)

Sl No Date Topic Duration Presenter
01 September 12, 2018 Programmatic Marketing Strategies and Tactics to Drive Customer Acquisition and Engagement 30 minutes Joe Macaluso
02 September 26, 2018 Improving Material Dispensing Yield in Manufacturing Applications 30 minutes Scheugenpflug Inc., USA
03 October 10, 2018 IPC’s Job Task Analysis Committee 30 minutes Dave Hernandez, IPC
04 October 24, 2018 Utilizing Grant Funding for Workforce IPC ­­Certification 30 minutes Sandy Kolp, Firstronic, LLC

More Information at: