From the Managing Director’s Desk:

The civil aviation industry in India is growing rapidly. This rapid growth has put a lot of pressure on the existing civil aviation infrastructure….

Read More

IPC India opens an office in Delhi to facilitate better services to its client in the NCR and northern parts of India.

The contact details of the new IPC India office at Delhi are as follows:
Contact Person: Mr. Abhishek Upadhyay
Address: Elcina House, 422, Okhla Industrial Estate
Phase-III, New Delhi - 110020.
Contact: +91 9313224509 /
+91 7338466579
E-mail ID: AbhishekUpadhyay@ipc.org

IPC India introduces E-Commerce portal:

IPC India has introduced e-commerce portal which can be used by the customers to enrol their candidates for the courses conducted by IPC India.


The portal can also be used for taking up of IPC India membership. The same can be facilitated at:


New Standards published during September 2018:

IPC-1791: Trusted Electronic Designer, Manufacturer, and Assembler Requirements.
IPC-4204B: Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Boards.

Courses conducted by IPC India during September 2018:

-J-STD-001G CIS/CIT - at IPC Training Centre, Bengaluru, September 3 to 7, 2018. - No. of participants: 06


-IPC/WHMA-A-620C CIT - at IPC Training Centre, Bengaluru, September 17 to 21, 2018. - No. of Participants: 09


-IPC-A-610G CIS, at Epcos TDK Electronics, Haryana. September 17 to 20, 2018. – No. of participants: 10

-IPC/WHMA-A-620C CSI, at IPC Training Centre, Bengaluru.September 24 to 28, 2018. - No. of participants: 09

Courses Tentatively Planned by IPC India During October 2018:

• IPC 600J - CIS – 03 to 05, October 2018- at Bengaluru

• IPC-A - 610G - CIS – 17 to 21, October 2018- at Pune

• IPC-A-610G - CIS/CIT – 08 to 11, October 2018- at Bengaluru

• IPC - CID – 24 to 26, October 2018 - at Bangalore.

• IPC - CID – 24 to 26, October 2018 - at Pune

• J-STD-001G - CIS/CIT – 24 to 26, October 2018 - at Pune.


India conducts successful Interpreter MissileTest at night.

India successfully conducted an interceptormissile test off the Odisha coast Sunday night,
achieving a major milestone . . .
Read More>

EVs are the choice of the future: NITI Aayog

NITI Aayog CEO Amitabh Kant is of the opinion that India is set to become the largest car market by 2030, while EVs will become the preferred mode of transport.
Read more at:

Defence industrial corridor in Uttar Pradesh to kick off with BEL project

The Uttar Pradesh government’s showcase defense industrial corridor project will get off the ground . . .
Read more

Boeing Setting Up Electronics, Avionics Facility in Bengaluru

Global aerospace major Boeing is setting up an electronics manufacturing and avionics assembly facility in this tech hub at an investment of Rs.1,152 crores . . .

Read more

Finance Ministry relaxes norms for import of exported electronic goods for repairs

The government has relaxed the norms for exported electronic goods, like mobile phone,color TV, certain medical devices . . .
Read more

Haier Announces Second Industrial Park in India, Signs MoU With Govt of UP

Haier announces Rs. 3069 crores investment to set up new manufacturing plant in Greater Noida.

Read more

Aruba to commence manufacturing in India to advance and expand innovation

Aruba’s manufacturing initiative will complement Aruba’s robust R&D capabilities in India . . .
Read more

Technical Article:

Reinvigorating Product Strategy by Mr. Peter Yu, Senior Director of Strategy & Marketing, MULTEK.
Read More>


IPC India, (a wholly owned subsidiary of IPC, USA) co-located and participated in the trade fair electronica India and productronica India Show scheduled on 26 - 28 September 2018 at BIEC, Bengaluru.

The event was inaugurated by the WECC members, Mr. Tom Chiu – Executive Member of HKPCA, Mr. Nam Wonki – Secretary General of WECC & representative of KPCA, Mr. AmritManwani – President, ELCINA, Mr. Bhupinder Singh – CEO, MMI, Mr. Falk Senger – MD, Messe Muenchen,
Mr. Kushal Patel – President, IPCA, Mr. Wu ShouKun - President, CPCA, Mr. Richard Chu - Consultant, TPCA and Mr. A Vijayendra – Managing Director, IPC India.


During the show, IPC India conducted the following events:

1. Hand Soldering Competition – Preliminary Round
The Winner was Mr. Bharath from M/s. Kaynes Technologies.

The Runner-up was Mr. Boregowda from M/s. Kaynes Technologies.
The prize distribution honors were done by Mr. Bhupinder Singh – CEO, MMI and Mr. Frederic Derrien – Sales Executive, JBC Soldering Tools Co. respectively.

2. Hand Soldering Competition – India Championship
The winners and runners-up from the previous preliminary rounds earned the eligibility to vie in the final round to win an opportunity to represent India at the Global Hand Soldering Competition to be conducted duringJanuary 2019 at San Diego, USA.

India Championship was won by
Mr. Kantharaju from M/s. Bharat Electronics Limited.

The trophy was given by Mr. Frederic Derrien – Sales Executive and Mr. Anand Selvaraj – Sales Manager, South India, JBC Soldering Tools Co.



3. Advanced Professional Development Course
IPC India conducted a technical workshop on “High - Speed PCB Design Analysis and Challenges” presented by Mr. S L N Murthy on 27th September 2018.

Around 55 participants from various companies like, Bharat Electronics Limited, Multi Tech Systems,U R Rao Satellite Centre (ISRO), Tessolve Semiconductor Pvt. Ltd., Tejas Networks Limited, Caliber Interconnect Solutions Pvt. Ltd.,Good Rich Aerospace Corporation, Pramura Software Pvt. Ltd. attended the course.



4. PCB Design Competition

IPC India organized PCB Design Competition for the first time at MMI Show.
The initial round was conducted offline where the participants designed the PCB schematics during two weeks’ time and the evaluation was done as per the IPC Designer Standard.The final two rounds were conducted on 27thSeptember 2018 where the contestants were quizzed first, and the best six out of 18 participants topped for the ultimate viva round.

The Winner was Mr. Krishnamurthy B S from M/s. Sienna Ecad Technologies.
The Runner-up was Ms. Suganthi Veerabadran from M/s. Tessolve Semiconductor Pvt. Ltd.

The trophies were distributed by Mr. Amrit Manwani – President, ELCINA and Mr. S L N Murthy – Principal Consultant at Wuerth Electronik India Pvt. Ltd. respectively.



5. Prof. Vedu Mitter presented a paper on “PCB Sector - Supply Chain Integration With the World” at India PCB Tech Conference on 27th September 2018 at MMI Show, BIEC, Bengaluru.

He was honored by the dignitaries, Mr. Amrit Manwani – President, ELCINA, Mr. Paresh Vasani – Managing Director, PCB Power,
Mr. Bhupinder Singh – CEO, MMI and
Mr. A Vijayendra – Managing Director, IPC India.



• IPC’s Call for Participation for IPC APEX EXPO 2019:

IPC - Association Connecting Electronics Industries® invites engineers, researchers, academics, technical experts and industry leaders to submit technical conference abstracts and course proposals for IPC APEX EXPO 2019 to be held at the San Diego Convention Centre.
Read More>










Wisdom Wednesday calendar: (Free Webinar for members only)

Sl No Date Topic Duration Presenter
01 October 10, 2018 IPC’s Job Task Analysis Committee 30 minutes Dave Hernandez, IPC
02 October 24, 2018 Utilizing Grant Funding for Workforce IPC Certification 30 minutes Sandy Kolp, Firstronic, LLC
03 November 14, 2018 Sneak Peek into IPC APEX EXPO Tech Conference 30 minutes
04 November 28, 2018 Results of PCB Technology Trends Study 30 minutes Sharon Starr, IPC

More Information at: