Click Here to know More —>
Your Name *
Your Email *
Phone Number *
Member of IPC IndiaNon-Member
What services may we assist you with? *
IPC India Membership
Audit - Standards Gap Analysis (SGA)
Sale of Standards
Training & Certification Program
Select The Course
IPC-A-600J CISIPC-A-610G CISIPC-JSTD-001G CISIPC-7711/21C CISIPC/WHMA-A-620C CISIPC-A-600J CITIPC-A-610G CITIPC-JSTD-001G CITIPC-7711/21C CITIPC/WHMA-A-620C CITIPC CID (Certified Interconnect Designer Basic)IPC CID+ (Certified Interconnect Designer Advanced)
Your Query *
We hope you and your loved ones are staying healthy and safe. After carefully analyzing significant global cost increases over the last two years, we find it necessary to implement a slight increase in the price of all IPC certification programs. The increase will take effect on January 1, 2022. We have worked hard to minimize the price increase while continuing to provide the very best products and services for the electronics manufacturing industry.
Online Certification Exams: Effective January 1, 2022, the registration cost for all CIS programs utilizing online exams will increase by $10. For example, the member cost of the CIS 610 program utilizing online exams will increase from $65 to $75. The registration cost for all CIT programs utilizing online exams will increase by $40. For example, the non-member price for a J-STD-001 CIT Certification will increase from $600 to $640.
Online Print Exams: Effective January 1, 2022, the price of the online print exam will increase by $40. For example, the non-member price for a J-STD-001 CIT Certification will increase from $600 to $640.
Online Print Exams: Effective January 1, 2022, the price of the online print exam will increase by $15 for each CIS student and by $45 for each CIT student.
Online Proctoring: In response to ongoing adoption and demand, IPC will continue to offer Online Proctoring as a certification option. IPC will continue to subsidize the cost of online proctored exams and will not be increasing the registration costs in 2022. Below is a helpful table outlining the new costs for the CIS/CIT/CSE Certification programs, effective January 1, 2022.
The IPC Education Team greatly appreciates your continued support through this time of growth and change.
IPC Education Team
Mr. N.S. Krishna Kumar
Mr. N.S. Krishna Kumar is a Certified IPC Trainer (CIT). He has long years of experience in Wire Harness Manufacturing. He was Heading Manufacturing units of TE Electronics (AMP). He was heading a JV between AMP and Leoni (a German company), making wire harnesses for MB. Presently consultant to several companies (Other than IPC) in Bangalore and around – from Manufacturing, Sourcing, Costing, Project planning, New Product Development, etc…, He trains employees in an effective way of getting the line balancing and reasoning for doing so. Recently in IPC (4.11.19), he conducted an interaction with all the manufacturing units (70 Participants). A lot of their doubts in manufacturing and application of IPC clauses were discussed as to how these are to be applied in regular businesses.
Mr. Bala Bhat
Mr. Ramani Vanavamalai
Mr. Ramani has 30 years years expereinc in PCB production and 10 years in PCB equipment and material management. His company KBR (India) Laminates & Technology provides technical support to International companies on technical and quality issues. He has a Bachelor of Engineering in Electrical Engineering and is associated with the Indian Printed Circuit Association (IPCA) as a Member (Technical) and Electronics Sector Skill Council of India (ESSCI). Mr. Ramani is a Certified IPC Trainer (CIT) in IPC/WHMA-A-620C; IPC-A-610 G; IPC-A-600 J; IPC-6012D and conducting IPC training & certification courses since 2013.
Mrs. Anuradha R. K.
Mrs. Anuradha R. K. has 10+ years of experience in the industry. She has worked in Elite Engineers provide consultancy for QMS ( Quality Management System ), where they Make QMS “Quality Maintained Simply”
Mrs. Anuradha is a Certified IPC Trainer (CIT) in Standards – IPC-A-610. She is conducting training & certification courses since 2013.
TOTAL DURATION: 3 Weeks
Design contest while is held at the institution level, Regional and National level in stages with a progressive increase in design intensity.
Inputs and folder contents
Available in Mechanical folder (01)
Refer folder (02)
documentation folder (04)
ELCINA’s Bhiwadi Cluster is now operational as a Greenfield EMC which was envisaged by MeitY under the EMC Scheme 2012. The entire basic and essential infrastructure services such as Internal Roads, Storm Water Drains, Water Storage and Supply System, Rainwater Harvesting System, Centralised Fire Fighting System, Sewage Treatment Plant, Dedicated 33KV HT power supply feeder line, own 33/11 KV Grid Sub-Station along with internal underground 11 KV electricity distribution system and Street Lighting are completed and operational now.
Currently, two manufacturing units are operating in the Cluster namely Aisan Fiem Automotives India Pvt. Ltd. (AFI) which manufactures electronic fuel injection systems and IC Connectors for 2 & 3 Wheeler’s for the Indian market, and Mercury Heatex Pvt. Ltd., which is manufacturing Heat Exchangers for ACs. One more company, BGSB Concrete Solutions Pvt Ltd, also completed the construction activity in their plot.
Till now, 20 companies have invested in the Cluster and have reserved 28.42 acres of land out of 30.62 acres saleable industrial plots in Phase-I.
ELCINA Bhiwadi SPV is now planning to develop a “Common Facility Centre” in the Cluster under the EMC 2.0 Scheme of MeitY. The proposed facilities in the CFC are planned with the objective of supporting the Cluster members and local ESDM industry and enhance their competitiveness. The CFC will function as a Service Provider to assist the Cluster members in innovating and developing new products, producing value-added products, enhance productivity, and meet global product requirements. Apart from major investment in Test & Measurement Lab, SPV will also establish a CoE/Incubation Centre and Centre for Start-Ups/ Training Centre as two other supporting components in the proposed CFC.
It is a matter of great pride for ELCINA that our EMC at Bhiwadi will play an important role in the Government of India’s ‘Atmanirbhar Bharat’ and ‘Digital India’ initiatives.
IPC India is planning to conduct a wire harness contest. It is proposed to have a multi-stage contest.
III) National – Final.
The Preliminary stage will be conducted as a company’s internal contest strictly under IPC guidelines:
The skill contest will constitute 3 primary factors and two support factors:
➢ Participants – Persons working in the company who would like to participate in the skill competition. He /She may be IPC certified or not certified, but good at making wire harnesses.
Has the basic knowledge of all the operations which are stipulated in the following paragraphs.
➢ Observer- An IPC Certified, either CIS or CIT, from the same company, who has good knowledge of all the processes as per 620 Standards and can distinguish between all the parameters such as ACCEPTABLE, PROCESS INDICATOR, DEFECT. He shall be neutral while judging the competitors’ performances. He/she shall be responsible for timing the contest for the participant.
➢ Referee- He /She must be a CIT with the company with a min of 5-6 years of experience in wire harness industries. In case of any conflict/disputes, the referee’s decision will be final, and no more discussions will be entertained. If the company does not have a CIT, the company can approach IPC
India to depute a referee on a chargeable basis.
➢ Support Factors
o Participating company –
▪ Should be able to support IPC India in the Skill competition, by providing Space
for contest, depute participants/observers/Referees.
▪ Should Support the event by providing the required components kit, as per their
drawing and BOM made in line with IPC India drawing and BOM that is shared.
▪ Should provide the required tools and accessories for making the wire harness as
▪ Provide required work tables with power outlets and adequate lighting.
▪ Provide all the required tools for the harness competition including safety
▪ Should be able to depute the winners of the competition, to next level of
competition to be conducted in any other location, by IPC.
▪ IPC India will not be liable for any type of compensation.
▪ Companies can decide the number of batches and participants per batch as per the availability of observers and workstations.
o Staff deputed from IPC to oversee as per IPC India Guidelines.
▪ He / She has no direct role in the actual making of the harnesses
▪ His/her responsibility is to oversee the arrangement whether IPC guidelines are
▪ To verify the material and drawing used for the contest are as per IPC India
approved documents and BOM.
▪ Participants, Observers, and referees are issued the necessary instructions as per the
The industry can use the same drawing provided by IPC India if they have components and tools as per
IPC India drawing OR develop their own based on the components and tools they have. Drawing developed by the participating company has to be sent to IPC India for approval.
The time allocated for Wire harness making is 45 minutes.
The Wire harness contest process should comprise of the following processes as per IPC 620
• Wire cutting
• Insulation Stripping
• Crimping of
o Closed barrel
o Open barrel
o Machine Contact.
• Wire splicing.
• Protective covering
• Bundle securing by Lacing/ cable tie
• Continuity Checking.
Each Participating Company should send the following to IPC India for Final approval in case the company
is using their own design. The documents should be received by IPC India at least 10 days in advance to
study and approve:
• Wire Harness drawing, with all the details of final assembly length, branching length, etc.
• A Schematic line drawing
• List of Tools that will be used for all the processes involved.
• All tools shall have the necessary Calibration/Validation. The same may be shared.
• Competition area layout diagram
Role of Observer:
• To oversee the operations of the participants.
• To monitor and record the time, the participant takes for harness assembly.
• To evaluate the operations performed and the harness produced are complying with IPC/WHMAA-620D Class 3 requirements.
• Based on the above, the observers have to award the points.
Points to be awarded are as per the below criteria:
✓ 2 Points for all the processes that are ACCEPTABLE as per IPC 620D Class 3.
✓ 1 point to all the Processes that are PROCESS INDICATORS (PI) as per IPC 620D Class 3.
✓ 0 Point to all the Processes that are DEFECT as per IPC 620D Class 3.
Role of Referee.
• He/she should be able to handle/run the entire skill competition in a smooth way.
• The referee must be able to judge the dispute considering the viewpoints of both Competitor and
Observer. The referee should be very neutral and unbiased.
• However the decision of the referee will be final and no further discussion will be entertained.
• The referee will finally announce the top 2 based on the final scores.
Check List for observing the participants’ practices and inspection of the in-process and finished
assembly will be shared separately upon submission of the drawing and BOM to IPC India.
A detailed individual guideline for Referee, Observer, and Participant will be shared separately upon the
the company identifying the personnel.
End of the document
For any query, please contact Saurabh K Saxena, IPC India Standards & Certification Head – firstname.lastname@example.org & email@example.com
The Hand soldering contest is planned to be conducted as a multistage contest :
1. Preliminary – at company level
3. National – Final
To conduct Hand Soldering competition at the company’s premises, an organization to ensure the following without any
1) Dedicated place to be identified for conducting the hand soldering contest to accommodate the no.
of workstations, participants, observers, and evaluators.
2) Workstations should have power points for equipment, adequate lighting. Ensure no shadows on
the working area.
3) Each workstation is to be provided with the following:
▪ ESD protection accessories comprising of the smock, wrist strap, finger cots for the
▪ Tool kit comprising of tweezers, nose pliers, cutter, wire stripper, flux pen, desoldering wick, lint-free wipes, cotton buds, safety goggles, toothpick.
▪ Component kit & PCB drawing/BoM as specified by IPC India.
4) Identify Observers for each workstation who are knowledgeable in IPC standards IPC-A-610 or IPCJ-STD-001
5) Identify the evaluator. He shall be a CIT/CSE in IPC standards IPC-A-610/IPC-J-STD-001. In case of
the non-availability of CIT within the company, IPC India can be approached.
6) Ensure availability of Inspected components as per BoM shared by IPC India. These are to be made into kits
and serially numbered. Kits can also be procured from IPC India and serially-numbered.
7) One additional fully equipped workstation shall be available for any exigencies.
8) All workstations to be serially numbered
Conducting the contest
1) Finalized list of contestants with the date of the contest shall be shared with IPC India. Contest details to be
provided as per below:
c. Job Title
e. If Passport available, its Details:
2) Every contestant shall be identified with a serial number
3) Depending upon the number of contestants and the workstations, group the
contestants into batches.
4) Each contestant will have to pick their workstation number in a lottery system.
5) The kit number, contestant number, and the workstation number need to be recorded
on the contestant checklist.
6) Ensure the contestants, observers, and evaluators have read and understood the
guidelines of the contest.
7) Observers need to be allotted to each workstation.
8) Contestants need to check the tools and equipment and the kit number.
9) Contestants need to follow ESD protection procedures before the start of the activity.
10) The time allocated for completing the task is as stipulated by IPC India. At the end of time, PCB assembly
has to be handed over to the observer. No extra time will be given for assembly. Additional 5 minutes will be
given for housekeeping and cleaning of the workstation.
11) The task includes the following:
Component BOM checking Component Assembly
ESD Compliance Soldering
Component preparation PCBA Cleaning
Wire preparation General work etiquette
12) When all the contestants are ready, the timekeeper shall start the contest and start the
13) Observer will monitor the proceedings with the operator’s checklist. 3 marks are deducted from
total for every non-compliance.
14) At the end of the allotted time, the contestant has to stop working and hand over the board to the observer.
15) Workstation and equipment/tools have to be cleaned and returned to the proper place. Non-compliance
to this to be awarded negative mark as per check sheet.
16) Observer to hand over the PCB assembly with observation sheet to the evaluator.
17) Start the next batch after ensuring that all the workstations are in order. Repeat the above process.
18) All PCB Assemblies with observer’s and evaluator’s score sheets are to be handed over to IPC India.
Wiring harness is essentially the nervous system in electrical/ electronic circuits and finds varied applications ranging across the Automotive, Defense, Aerospace, Medical, Telecommunication, ICT, and Consumer durables sector. The domestic wiring harness industry has expanded over the recent years backed by the growth of India as a global automotive manufacturing hub. Wiring harness manufacturers work closely with the OEMs to develop harness systems for various vehicle models and variants.
Requirements and Acceptance for Cable and Wire Harness Assemblies is a requirement for class 3 products, mostly used in the automotive, defense, aerospace, medical sector. Staff employed in Cable & Wire Harness Assembly companies requires knowledge & re-skilling.
IPC India is working to organize the competition through a committee and support from member volunteer experts from the industry. The task before the competing participants is to prepare a proper cable & wire harnesses within the allotted time frame.
Members/Non-Members can also organize such “Cable & Wire Harness Assemblies Competition” within the organization with support from IPC India to promote skills and motivate staffs.’
Since 2013, the IPC India PCB Design Contest has received recognition from PCB Designers & Manufacturers.
Since PCB is an important part of electronics and India is looking at more PCB design & manufacturing, the competition has received an overwhelming response from the Indian electronics industry.
IPC India PCB Design Contest helps to put the skills of PCB Designers to test and allow them to compete with the best in the industry.
The contest recognizes the best designers amongst the participants, judged on the following criteria:
• CAD tool expertise.
• Perception of design technology and application of design standards.
• Overall understanding of PCB design requirements.
• Sensitivity to consequences of Design Constraints on Down Stream Activities like Fabrication and Assembly.
In addition to gaining the recognition of their peers, participants will be able to benchmark their PCB design skills against those of their design colleagues and receive recommendations from advanced certified designers (CID+) and world-class specialists in the field on how to improve performance.
IPC India organizes the contest through a committee and support from member volunteer experts from the industry. The task before the competing participants is to design PCB within the allotted time frame. The design task will be performed at the contestant’s workplace and then submitted to IPC India.
• Design contest is conducted offline.
• Contestants shall be given 4 weeks’ time to complete the design and submit the deliverables.
• Accepted EDA tools: Cadence Orcad/Allegro, Mentor pads/expedition, Altium, Zuken Cadstar. Orcad schematic will be provided.
• The scope of design is from netlist import – Layout Design including library creation – Gerber generation.
• Design provided is a mixed-signal, high-speed design encompassing current design technologies. This is a representative design and need not be a functional design.
• The contestants are required to participate in second-level evaluation Viva questions on the event day.
– Questions on Manufacturability aspects.
– Questions about how the design was done.
Members/Non-Members can also organize such a “PCB Design Contest” within the organization with support from IPC India to promote skills and motivate staffs.’
October 2021: Promotion of IPC Skill Challenge Competitions to Members & Stakeholders in India Region
November 2021 – March 2022:
· Electronics Companies send the registration form to IPC India
· As per IPC Guidelines, organizes Hand Soldering/Wire Harness/PCB Design challenge at their company premises using own tools/equipment
· Company can nominate observer/judge from own company if IPC certified individuals available, otherwise IPC will support IPC Certified Instructors & Observers
· IPC Team Member present certificate to the winner & runner up at company location
April 2022 – July 2022: IPC India to organize Semi-Final Round with the winners of the 1st round at Networking events at Hyderabad, Chennai, Pune, Bengaluru, Colombo (TBC) & New Delhi (August 2, 2022).
August 4, 2022: Final Round to be played at Bengaluru.
Initiated right after the inception of IPC in 2011, the IPC India Hand Soldering Competition has since grown tremendously. With an increasing number of participants every year, the competition has garnered incredible popularity in the electronics sector.
The competition has received an overwhelming response from a broad spectrum of industries both from the private and Government sectors. It recognizes and felicitates shop floor technicians, who otherwise are denied due credit in any organization.
IPC India conducts 4–5 preliminary rounds. The technicians selected in the preliminary rounds compete for the final title. The winner is declared as the ‘Indian Champion’ and is eligible to represent India in the IPC’s ‘World Hand Soldering Championship’.
IPC India organizes the competition through a committee and support from member volunteer experts from the industry. The task before the competing participants is to build a functional electronics assembly within the allotted time frame. The competence of the assembly is judged by the Master Trainers in accordance with IPC-A-610H Class 3 criteria, the speed at which the assembly is produced, and also the overall electrical functionality of the assembly.
Members/Non Members can also organize such “Hand Soldering Competition” within the organization with support from IPC India to promote skills and motivate staffs
August 2, 2022
Hotel Le Meridian
Connaught Place, New Delhi 110001
Theme: Information Communication Technology (ICT); IOT
August 4, 2022
Hotel ITC Gardenia
Ashok Nagar, Bengaluru, Karnataka 560025
Theme: Defence & Aerospace Technology
Member Comments for IPC 610H & IPC J-Std-001H Standards Review!
We request all companies from IPC India Region using IPC 610H (Acceptability of Electronic Assembly) & IPC J-Std-001H (Requirement for Soldering Electrical & Electronic Assemblies) Standards to send comments for the Standards Review Process.
We request companies to download the form & send us comments at firstname.lastname@example.org
Team IPC India
IPC India Regional Office
The Global not-for-profit Association was established in 1957 in the USA representing all facets of the electronics manufacturing industry in 70+ countries. IPC helps organizations to achieve high-quality end products in the manufacturing process and builds capability in the export market & supply chain. Member representations are from SMEs, large, Global & Government organizations. IPC organizes various expos worldwide and our annual flagship event APEX expo is organized in the USA. For more information about us, please visit – https://www.ipc.org/
About IPC India Regional Office
Since 2010, IPC has had a regional presence in India and is responsible for member business development services for India, Sri Lanka, Bangladesh, and countries in the Middle East & Africa region. IPC India Regional Office supports OEMs, EMS, PCB manufacturers, electronics industry suppliers, and cable & wiring harness manufacturers to Build Electronics Better. We provide industry standards, certification, skill training, global market report, and create a networking platform for connecting regional & global companies. For more information about regional office activities, please visit – https://www.ipcindia.org.in/ipcindia/
Integrated Electronics Manufacturing Interconnections (IEMI) 2022
IPC has successfully completed 10 years journey in India, due to COVID challenges we are planning our celebration for 2022 with series of activities – Member networking events, workshops, and skill challenge competitions in different parts of India. Final mega-events will be organized at New Delhi & Bengaluru during August 2022 with additional activities and would also like to invite IPC members from the international region.
IEMI will be an annual event for the industry leaders & professionals in the electronics industry for the India, Sri Lanka, Bangladesh & Middle East Africa region, for exploring business opportunities and develop trade ties. IEMI 2022 will be organized as two full business day events in New Delhi (2 August 2022) and Bengaluru (4 August 2022). The global electronics industry event allows designers, manufacturers, traders, suppliers, service providers, and technical experts to connect – communicate – collaborate – create & develop relations.
Last two years COVID 19 has impacted the electronics industry globally. IPC believes 2022 will be the year to regain confidence, morale and build new connections.
Solomon S Prabhu
Mr. Solomon is Assist Manager (IT & Training) with IPC India , He has done B.Sc – Information technology, He is with IPC India since form 2018 & Certified IPC Trainer (CIT) for IPC-J-STD-001 -Requirements for Soldered Electrical and Electronic Assemblies & IPC-7711/21 Rework, Modification and Repair of Electronic Assemblies and Conducting IPC training & certification courses for IPC-7711/21C as a co- instructor since 2018. He has experience in IT Administration, system maintenance, hands on soldering SMT & PTH , BGA.
Vijai Kumar Loganathan
Mr. C.L. Vijai Kumar is Assistant Manager – Business Development for Tamil Nadu Region in IPC India, He has done B.E. (Electronics & Communication Engineering) M.E. (Communications Systems) PGDM (Operations Management) and he is Certified IPC Trainer (CIT) for IPC-J-STD-001- Requirements for soldered Electrical and Electronic Assemblies, he has been associated with IPC India since 2019 and as a Co-trainer he conducts Practical’s for IPC- J-STD-001 In Tamil Nadu Region For Members & also conducts training’s on the customized topics for IPC-J-STD-001 depending upon the members requirement.
Manish Kumar Vashishta
Mr. Manish is Assistant Regional Manager -Business Development for North Region in IPC India . He has done B. TECH (ELECTRONICS & COMMUNICATION)- MBA (MARKETING & INTERNATIONAL BUSINESS) & He is Certified IPC Trainer (CIT) & Certified Standard Expert (CSE) for IPC-J-STD-001 – Requirements for soldered Electrical and Electronic Assemblies, he has been associated with IPC India since from 2019 and Co-trainer conducts Practical’s for IPC- J-STD-001 In The North Region For Members & also conducts training’s on the customized topics for IPC-J-STD-001 depending upon the members requirement.
Mr. R P Shukla
Mr. R P Shukla has around 29 years of experience in Electronics Manufacturing Services and worked in different companies – in the Capacity of GM – Operations Plant Head), Quality and Engineering Head, etc. Having extensive exposure on EMS, Thick Film Hybrid Micro Circuits and Lean Manufacturing. R P Shukla has worked with SGS Tekniks (GM – Opeartions and GM – Corporate Quality and Process Engg), Vihaan Network Ltd (GM – Quality), Communications Test Design India Ltd (GM – Opeartions)), Elin Electronics, Genus Power Infrastructures Jaipur, XO Infotech Gurgaon, Altos India Ltd and Vikas Hybrids and Electronics Ltd Bhiwadi.
Mrs. Vasantha. K.B.
Mrs. Vasantha has 35+ years teaching experience in PCB designing, manufacturing, assembly & packaging for Students pursuing Master of Engineering, Master of Technology and PhD. She is associated with Indian Institute of Science (IISC), Bengaluru in Department of Electronic Systems Engineering. She is conducting IPC training &certification courses since 2010 and Certified IPC Trainer (CIT) in IPC-7711/21.
Mr. T.N. Phanishayee
Mr. T. N Phanishayee is Certified Master IPC Trainer (MIT) and involved with IPC India for 1 decade as Instructor. He has 25+ years of experience in production, testing, quality, customer support, maintenance and repair services of electronic products. Mr. Phanishayee has supported several professionals in electronics industry in getting IPC certification and built capability in handling manufacturing process. He is Certified IPC Master Trainer for IPC-A-600, IPC-6012, IPC-A-610, IPC/WHMA-A-620, J-STD-001 and IPC 7711/21.
Mr. B. J. SRINIVAS
Mr. B. J. Srinivas has 34+ years experience in marketing and technical support. He has worked in MNC companies like Siemens, Sony, Juki. He is running partnership company named Kreative Technologies that provides consultancy, sales and service of equipment to the Electronics Manufacturing sector. Mr. Srinivas is Bachelor of Enginering in Electronics & Communication and Certified Ipc Trainer (CIT) in Standards – IPC-A-610; IPC-J-STD-001 & IPC-7711/7721. He is conducting IPC training & certification courses since 2013.
Mr. C S NAGARAJ
Mr. C S Nagaraj is Certified Master IPC Trainer (MIT) and involved with IPC India for 1 decade as Instructor. He has 30+ years of experience in areas of PCB manufacturing, assembly & material management. Mr. Nagaraj has supported several professionals in electronics industry in getting IPC certification and built capability in handling manufacturing process. He is Certified IPC Master Trainer for IPC-A-600, IPC-6012, IPC-A-610, IPC/WHMA-A-620, IPC-J-STD-001 and IPC-J-STD-001 (Space). He is member of SMTA and earlier worked with Indian Government owned telecommunications equipment manufacturer.
Mr. Amba Prasad
Mr. Amba Prasad is Product Architect at Tejas Networks and IPC Vounteer Instructor since 2015. He has disciplinary hands-on role in product development activities for carrier class communication equipment, including PCB and backplane layouts. this includes materials and processes for pcb, backplanes, and power supply modules, starting from schematic definition, constraints management, physical layouts, and fabrication of proto PCBs, DFA resolutions for assemblies. Has defined DFM, DFA and Constraints Management Flows involved in High Speed System Design Requirements. Additionally, he conducts IPC Designer Course for IPC Members.